lodging
Enhancing Lodging Environments
   
In the world of hospitality, it's all about guest experience; a happy guest is a guest that stays with you again and again. There are numerous factors to take into consideration when creating a satisfying guest experience including - operating budgets, quality of the surroundings, and adequate staffing. These factors play a significant role in your guests' satisfaction, and finding ways to improve upon them puts you ahead of your competition. This is where we come in.

With Ameren Missouri's BizSavers® program, you can install a variety of energy efficiency equipment and receive cash incentives to help offset the initial cost. We understand the importance of offering your guests the most enjoyable experience possible while also reducing costs, and our team of energy efficiency experts is available to help you start saving today!
   

Popular Options


icon
Lighting Retrofits

Replace inefficient lighting such as T-12 fluorescent lighting with more efficient T-8s, T-5s or LEDs and get incentives. Occupancy sensors also qualify for cash incentives.
bar
commercial cooking
Commercial Cooking
Commercial cooking equipment upgrades are eligible for cash incentives from the BizSavers program and can help your business save money each month! Check out our incentives for ENERGY STAR® holding cabinets.

bar
electric water heating
Electric Water Heating

Replace standard electric water heating systems with commercial heat pump water systems and start raking in the savings! Also consider adding pre-rinse spray valves and low-flow faucet aerators to existing systems.

bar
hvac
HVAC

Consider adding hotel room control systems to send the HVAC to “vacancy mode” when unoccupied, saving on heating and cooling vacant rooms. 


bar
motor controls vfds  Motor Controls/VFDs   Apply for Standard Incentives for installing VFDs in pool pump systems. 

 


Options to Save Energy and Earn Cash Incentives


standard
Standard Incentives
Incentives are paid on a per unit-installed basis and are available for a variety of qualified improvements. Projects that include all Standard measures do not require pre-approval unless the incentive is anticipated to be more than $10,000. For incentives more than $10,000, please see Custom Incentive below. Eligibility for a Standard Incentive requires customers to install measures achieving a minimum total incentive of $150 per application. All Standard Incentive applications must be submitted within 180 days of equipment invoice date.


Get Started! Apply for a Standard Incentive now and receive an incentive check 45-60 days after completion paperwork is received.

steps for standard program


   

custom
Custom Incentives   

If your project is not on the Standard Incentives list, it may qualify for a Custom Incentive. Virtually any cost-effective energy efficient project qualifies for a Custom Incentive. These incentives are calculated based on the projected annual energy reduction. 



Get Started! Custom Incentives require pre-approval before purchase or installation. Apply for a Custom Incentive today.

steps for customer program

   

new construction
New Construction Incentives
Starting from scratch or completing a renovation? Incentives are available through the New Construction program. These incentives must be pre-approved prior to the Design Phase of the project.


Get Started! New Construction Incentives require Program involvement before Design Team meetings begin. Please review the New Construction Handbook and New Construction Guidelines, then contact us to begin the application process.


Steps for new construction program 2

   

rcx
Whole Building Performance/Retro-Commissioning Incentives (RCx)
Retro-Commissioning (RCx) is the process of optimizing systems within your building and requires an extensive facility assessment to explore energy-saving opportunities. RCx is a good solution for large buildings. The program pays $.02-.03 per kWh for the assessment (depending on size of the building), in addition to $.07 per kWh saved on all RCx projects.


Get Started! You must use a pre-approved RCx service provider (RSP), so contact an RSP to get started today.
steps for retro commissioning program

   

   

Still Not Sure Where to Start?


Visit our approved Trade Ally Network page to search for qualified contractors and service providers that will help you design, purchase and install your energy efficient equipment. Or, contact one of our business development representatives by calling 866.941.7299.


dotted line

More tools for your business:
 
program overview
  success stories
  training and events
         
tools and resources
  find a contractor
 
Follow Us Follow Us